幸运快3

Jiangsu YuPu Solar Energy Co., Ltd.
Products Category
Contact Us

Name: Linda
Tel: +86-513-87287659
Fax: +86-513-87287659
Mobile: +86-18252802090
E-mail: sales@yuputyn.com
              yupusolarenergy@hotmail.com
Add: NO.288West Fushou Road Rugao City, Jiangsu Province, China 226500
MSN: yupusolarenergy@hotmail.com

3、Are solar tube collectors more efficient than flat plate collectors?

When comparing peak efficiency levels it may seem that there is little difference between flat plate and evacuated
tubes, in fact flat plate may actually be higher, but this is during minimal heat loss conditions. When averaged over a year evacuated tube collector have a clear advantage. The key points are as follows:
1). Due to the cylindrical shape of the evacuated tube, the solar tubes are able to passively track the sun
throughout the day. Flat plate collector only provide peak energy output at midday when the sun is perpendicular
to the collector's surface. To learn more about IAM and performance click here.
2). Air is evacuated from the solar tube to form a vacuum. This greatly reduces conductive and convective heat
loss from the interior of the tube. As a result wind and cold temperatures have less effect on the efficiency of the
evacuated tube collector.
3).JIXIANG solar collectors can often be used in subzero temperatures without the system sustaining damage. Flat plate systems often require expensive and complicated "antifreeze" systems to be installed. 
4). Evacuated tubes are strong, long lasting, and should one be broken, inexpensive and easy to replace. If a  flat
plate collector panel is damaged the whole panel must be replaced. 
5). Due to the high efficiency absorption of solar radiation even during overcast conditions, combined with
excellent insulative properties of the solar tube, solar tube collectors can heat water all year round (backup from
gas and electricity is still required).
6). Due to the various advantages of evacuated tube collector over flat plate collectors, a smaller collector can be used to provide the same heating performance. For example, a standard household of 4-5 people would usually
require a 250-300L water storage tank. Depending on your location, only 30 evacuated tubes would be required
to provide all summer hot water needs and a large percentage in other seasons.
7). Flat plate solar collectors can produce similar heat output to evacuated tube collectors, but generally only
during hot, sunny conditions. When averaged over an entire year, evacuated tube collector heat output per net m2 of absorber area, is between 25% to 40% greater that a flat plate collector.

bbin体育 波克棋牌 申博体育 皇冠体育网 彩票万能公式